AEF 2020
Beka Schreder
Automatic LubricationCentral AfricaEast AfricaProduct & ServicesSouthern AfricaWest Africa

GreaseMax® lubricators maintain bearings in idle plant

Grease-lubricated bearings that are kept idle for long periods are subject to the effects of grease degradation and possible vibration damage.

Problems that can occur with bearings that are idle over time include:

  • Water contamination: Liquids, humidity and condensation inside the bearing housing caused by daily temperature cycles all result in the grease absorbing water. This will in turn cause a break-down of the oil’s film strength, it will allow the on-set of corrosion, the grease additives will be degraded and bearing surface damage can occur due to hydrogen embrittlement. Note that daily temperature cycles can cause a build-up of condensation even in dry climates.
  • Oil separation: This will vary between greases due to variations in the grease type and manufacturer’s processes however if the base oil in the grease separates out from the grease thickener the grease will lose its lubrication properties. If the oil film separating the rolling surfaces degrades or is lost, vibration-caused damage will occur.
  • Vibration damage: Sometimes only a portion of the plant will be shut down, so vibrations from the plant still running can be transmitted to the static plant, with damaging effects to the bearings, especially rolling element bearings, as oscillations drive lubricant out of the contacting bearing elements. A sufficient supply of grease should be maintained to keep a film on the bearing surfaces and to ensure that the grease forms a seal to exclude moisture.

Consideration therefore should be given to the maintenance of bearings in plant that is idle for extended periods.

GreaseMax® lubricator’s controlled, slow-rate continuous lubrication will assist with these maintenance problems.

AdvertisementGreaseMax
Country
Close