The mining industry must forgo its traditional energy consumption patterns, in a bid to ensure that the sector de-carbonize towards a greener and sustainable method of exploration. Given the need to increase energy supply in a globally carbon constrained environment, the mining trade needs to improve its energy efficient technologies, such as electrical variable speed drives, which could reduce energy consumption drastically.
The fundamentals of AC Variable Frequency Speed drive technology persist, but many elements are rapidly changing in aid to move towards a more sustainable and environmentally friendly mining future. Increasingly, software is embedded in today’s mine processing components, offering new functionalities and enabling the AC drive to play a larger role in the processing plant.
“Conventionally, motors run at a fixed speed, regardless of actual output requirement, wasting a tremendous amount of energy. Energy output use can be reduced by 60%, by controlling motors with electrical Variable Speed Drives.” says Stephen Brown, Danfoss Drives – Mining Accounts and Business Development Manager, Turkey Middle East & Africa.
New motor types are appearing, placing additional demands on motor-drive control. This in turn means that the AC drive needs to be able to control an expanding variety of motor types, without burdening the end user with more complexity. In addition, new energy efficiency requirements lead to more variable speed applications.
Certain AC Drives are designed for exactly the needs of mining and mineral processing plants, coping with extreme conditions, heavy loading and controlling equipment installed a long distance away.
No matter how well the plant design has been optimised, there is always a way to drive down costs even further. AC Drives are used extensively for this purpose, extending equipment lifetime, optimizing processes, reducing maintenance and saving energy costs. The mining and minerals industry present some of the most challenging environments for production. Mine sites, mineral processing facilities, associated stockyards and ports facilities, are large scale and often in remote locations.
All Danfoss Drives ≥90kW, incorporate a back-channel cooling design, with separate cooling paths for the power components, control electronics and an IP54 seal, between these two paths. This back-channel cooling removes approximately 85%-90% of the power loss directly through the heatsink, leaving only 10%-15% of the total loss dissipated in the switch room. Consideration has to be given to the outside air quality, but if it is suitable, using the heatsink cooling fans and appropriate mounting and ducting, filtered external air at temperatures of up to 50 degrees Celsius, can be used to exhaust approximately 85%-90% of the heat loss from these VSDs directly outside the switch room, without affecting the switch room pressurisation. The switch room air conditioning system only needs to be sized for the remaining 10%-15% losses. Utilising this feature can dramatically reduce the air conditioning requirements of the switch rooms and provide significant project cost savings, along with operational ongoing cost savings, compared to VSDs without such a design feature.
“The mining industry is a major consumer of energy and is responsible for more than 40% of the total industrial energy use. In Sub-Saharan Africa, the energy intensive users group alone consumes over 40% of electricity produced in South Africa. Just less than 50% of the energy intensive users in South Africa, are the mines”, according to Energy Minister – Jeff Radebe.
It is with this need for energy efficient technology, that Danfoss South Africa is embarking on a series of informative webinars, geared towards mining engineers, specifiers, buyers, mining houses and investors alike. These interactive webinars will enable mining experts & learners alike, to think differently about their current energy usage and how the right drives are enabling energy costs savings.
Register at a date and time that will be convenient to you:
- 23rd September 09:30 CAT – Register
- 27th October 08:30 CAT – Register
- 27th October 18:00 CAT – Register
- 28th October 11:00 CAT – Register
- 24th November 09:30 CAT – Register
By Lynne McCarthy – Marketing Specialist – Danfoss Turkey, Middle East & Africa